Instructions for our new two step PC-41 Plus
Headlamp Restoration
BOTCO, Inc
(918) 636-2932
(918) 636-2932
Made in
Tulsa, OK. USA
Tulsa, OK. USA
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
PC-41 PLUS Links
No Sanding Required
No Sanding Required
Instructions for our new two step PC-41 Plus
No Sanding Required
Before Treatment
After Treatment
STEP 1
Start with a small area and
rub in straight line using
PC-41 Plus (Green)
Start with a small area and
rub in straight line using
PC-41 Plus (Green)
STEP 2
Clean same area and
remove haze with
PC-41 (Blue)
Clean same area and
remove haze with
PC-41 (Blue)
STEP 3
Repeat until restoration is
complete and then apply
paste wax for extra protection
Repeat until restoration is
complete and then apply
paste wax for extra protection
Drill Pad Instructions For
Severely Damaged Headlamps
Requires Variable Speed Drill
and PC-41 Buffing Pads
Severely Damaged Headlamps
Requires Variable Speed Drill
and PC-41 Buffing Pads
For best results begin
with a small test area.
Buff only in straight lines
with a small test area.
Buff only in straight lines
Start with damp black
drill pad. Buff until the
lens is frosted
drill pad. Buff until the
lens is frosted
Wipe off damaged residue
with included blue towel.
Lens will still appear frosted
with included blue towel.
Lens will still appear frosted
Follw with damp grey drill
pad and buff in straight lines
until frosted and smooth
pad and buff in straight lines
until frosted and smooth
Again wipe off residue
with blue towel. Lens
will still appear frosted.
with blue towel. Lens
will still appear frosted.
Apply PC-41 to white pad
and rub on frosted lens.
Lens will now become clear.
and rub on frosted lens.
Lens will now become clear.
Repeat for entire lens and use
straight buffing motion. Start at top and work to bottom.
straight buffing motion. Start at top and work to bottom.
Apply paste wax to seal
and protect. Treat with
PC-41 every 6 months.
and protect. Treat with
PC-41 every 6 months.
Before Treatment
After Treatment
Apply PC-41 to white pad
and rub on frosted lens.
Lens will now become clear.
and rub on frosted lens.
Lens will now become clear.
Repeat for entire lens and use
straight buffing motion. Start at top and work to bottom.
straight buffing motion. Start at top and work to bottom.
Apply paste wax to seal
and protect. Treat with
PC-41 every 6 months.
and protect. Treat with
PC-41 every 6 months.
Again wipe off residue
with blue towel. Lens
will still appear frosted.
with blue towel. Lens
will still appear frosted.
For best results begin
with a small test area.
Rub only in straight lines.
with a small test area.
Rub only in straight lines.
Start with black pad and
wet before sanding.
Rub until lens is frosted.
wet before sanding.
Rub until lens is frosted.
Wipe off damaged residue
with included blue towel.
Lens will still appear frosted.
with included blue towel.
Lens will still appear frosted.
Follow with dry grey pad
and rub in straight lines
until frosted and smooth.
and rub in straight lines
until frosted and smooth.
Extremely damaged lens may require repeated cleaning steps
Remember to always keep bottle tightly sealed when not in use
Before Treatment
After Treatment
Before Treatment
After Treatment